I loved teaching Intro Painting. This was one of my favourite lessons, all about the reflectivity of the painting surface, the ground, and the pigments. These days you’d probably do this on a powerpoint but I used to write it all on a chalk board or white board, which made it even more fun. I would also have a palette and paint ready to do demos. The Painter’s Craft, by Ralph Mayer, Penguin 1979, was required reading, a great reference book, still in print. There is also Ralph Mayer’s Artist Handbook of Materials and Techniques, which is much more detailed for the advanced painter.
Teaching painting required a balance between very basic technical principals, like these, and exploring the possibilities for what painting lends to expression. Certainly the loaded historical baggage of painting comes with huge territory that one needs to both learn and unlearn. For that, talks about both historical and contemporary artists was helpful. Critiques were a way to talk through both the ideas and the formal strengths and weaknesses of each work. Simple practice was the only way to learn. Work, work, work. Fail and succeed. This is learning.
The presence of a teacher walking around the studio also had a role to play. At one time classes were limited to 12, if you can believe it, but by the time I retired class size was up to 30 (not good for anyone). As a teacher, I was aware that my presence could be inhibiting. Playing music was good, in those days when everyone wasn’t wearing their own ear phones. Words of encouragement were good, and giving technical suggestions was about all I could do. Students learned from each other too, sometimes more than from their teacher. At the University of Victoria, where I taught, we also required that students learn to build their own stretcher frames, stretch their canvas, and prime it, at the 101 level.
Here were some things covered in this lesson:
The Ground
The ground, the surface upon which artists paint, is the base of the painting and the light inside it. Paint filters light that is external to the painting through to the ground where it becomes internal and then reflects back out to the viewer.
The handling of the ground helps determine the painting. The density and texture of the grounding medium determines the behaviour of the paint/filter on the surface. The more dense the gesso, the more regular the reflection.
You can put a ground on many different kinds of supports, ie. canvas, plywood, hardboard, cardboard, or found objects.
Prepared Gesso is the common ground we will use in this class.
The Basic Pigments
Each pigment has its own characteristics. You should get to know them all. Sometimes the beginning painter thinks they can paint the rainbow colours, but it doesn’t work like that since you are dealing with a substance and a ground, not with coloured light. The pigments’ characteristics are the same whether you are using oil or acrylic.
Get to know your pigments. The colour of paint straight from the tube is called its mass-tone or top-tone. Each pigment has different characteristics when you mix it with white (its undertone). Here some of the essential pigments.
Mars Black, Carbon Black, Ivory Black
Titianium White, Zinc White
Cadmium Red Deep, Cadmium Yellow Light, Cadmium Red Medium
Alizarin Crimson,
Cerulean Blue
Yellow Ochre
Burnt Umbre, Raw Umbre
Phthalo Green, Oxide Green, Sap Green
Phthalo Blue, Ultramarine Blue
Paynes Gray
Burnt Sienna, Raw Sienna
The history of pigments is fascinating, from the early days of grinding rocks, dried plants, or scrapping soot from lamp covers, to the use of industrial waste. For example, Ultramarine Blue was originally made from Lapis Lazuli. Because it was rare, in the Renaissance it was used in religious paintings to signify Holiness. Some paints were discovered in industrial wastes that were vividly coloured. Turner Green, for example, was developed for John Turner from industrial run off. Synthetic Violet was accidentally discovered through research into a cure for Malaria. Painters would grind their own pigments, then add mediums to them to make the viscous substances used on their canvases.
Always remember that pigments are very toxic and all precautions must be taken not to imbibe, or get on the skin.
The 5 Basic Kinds of Pigments
Because some pigments have been made from organic substances or evaporative processes and chemical methods, they can be fugitive, as opposed to inert. Both their chemistry and their UV absorption affects how archival they are. This is also outlined in the book. Certain varnishes will protect the painting from UV rays.
Native Earths
Calcined Native Earths
Artificial or Synthetic Mineral Colours
Synthetic Organic Pigments
Lakes and Toners
Opacity and Transparency Varies from Pigment to Pigment
This is important to know because you can take advantage of the reflective quality of the ground if the pigment is transparent. Glazing, for example, is a technique that is most effective with transparent colours.
Opaque Pigments
All Cadmiums (red, yellow, orange)
Vermilion
Venetian Red
Indian Red
Yellow Ochre
Naples Yellow
Cerulean Blue
Titanium White
Ivory Black
Transparent Pigments
Alizarin Crimson
Quinacridone Red
Viridian
Phthalo Blue, Green Turquoise
Ultramarine Blue
Cobalt Violet, Blue
Sap Green
Jenkins Green
Hansa Yellow
The manufacturer’s colour chart will show the transparency of each pigment, its mass-tone (from the tube) and its undertone (mixed with white). You can often pick one up at the art supply store to keep for reference.
Reading:
The Painter’s Craft by Ralph Mayer, published by Penguin Books, 1979
Bright Earth: Art and the Invention of Color by Philip Ball, The University of Chicago Press, 2001
Posted on August 29, 2022
